7.4V 2200mAh

12V 1.3A

9V 250MAH

6V 1.3A

NI-CD/NIMH (AA/AAA)

1,2V 900MAH NI-MH - AAA

Make your projects to go green this summer with our specialized USB/Solar Lithium Ion Polymer Battery charger! This charger is a very unique design, perfect for outdoor projects, or DIY iPod chargers. We've spent over a year testing and tinkering with this charger to come up with a plug and play solution to charging batteries with the sun and we're really pleased with what we ended up with.

This is a very small, extremely light weight battery based on the new Polymer Lithium Ion chemistry. This is the highest energy density currently in production. Each cells outputs a nominal 3.7V at 110mAh! Comes terminated with a standard 2-pin JST-PH connector - 2mm spacing between pins.

6V 4.5Ah

If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! 

This is a very small, extremely light weight battery based on the new Polymer Lithium Ion chemistry. This is the highest energy density currently in production.

TP4056 

12V 2.4Ah (134X65X60 MM)

1 unit

This charger accurately balances and charges Lithium Polymer, LiFe (A123), NiCd and NiMH batteries. It will handle LiPo/LiFe up to 6S and NiMH/NiCd up to 15S and shows individual cell voltage during charge with realtime updates throughout the charge cycle.

These are very slim, extremely light weight batteries based on the new Polymer Lithium Ion chemistry. This is the highest energy density currently in production. Each cells outputs a nominal 3.7V at 2000mAh!

6V 2,8AH

These are very slim, extremely light weight batteries based on the new Polymer Lithium Ion chemistry. This is the highest energy density currently in production. Each cell outputs a nominal 3.7V at 1000mAh!

The LiPo Rider Pro is an enhancement of LiPo Rider. It can supply higher load output than LiPo Rider. The LiPo Rider Pro board allows you ride the solar wave to run your favorite 5V device. 

This is the Sunny Buddy, a maximum power point tracking (MPPT) solar charger for single-cell LiPo batteries.

With plug included.

Female adapter plug with cable included!

5 x AA Battery

Battery capacity indicator allows you to know the battery value promptly.

VL1212

Two USB outputs allow you to charge two devices at the same time. High input and output intensity ensure charging speed. Four LED lamps inform about the level of charge.

This female JST RCY plug, also called a BEC connector, has 10 cm 20-AWG leads with stripped and tinned terminations. The connector is keyed so that power cannot be reversed.

This male JST RCY plug, also called a BEC connector, has 10 cm 20-AWG leads with stripped and tinned terminations. The connector is keyed so that power cannot be reversed.

VL3288