Anemometer Wind Speed Sensor w/Analog Voltage Output
  • Anemometer Wind Speed Sensor w/Analog Voltage Output
  • Anemometer Wind Speed Sensor w/Analog Voltage Output
  • Anemometer Wind Speed Sensor w/Analog Voltage Output

Anemometer Wind Speed Sensor w/Analog Voltage Output

0 Review
€75.00
Tax included
BE15000782

An anemometer is a device used for measuring wind speed, and is a common weather station instrument. This well made anemometer is designed to sit outside and measure wind speed with ease.

Quantity
Out of stock


  • Política de segurança Política de segurança
  • Política de entrega Política de entrega
  • Política de devolução Política de devolução

To use, connect the black wire to power and signal ground, the brown wire to 7-24VDC (we used 9V with success) and measure the analog voltage on the blue wire. The voltage will range from 0.4V (0 m/s wind) up to 2.0V (for 32.4m/s wind speed). That's it! The sensor is rugged, and easy to mount. The cable can easily disconnect with a few twists and has a weatherproof connector. Note: As of 11/06/2014, shipping weight has been changed on this product to match UPS' new dimensional weight regulations. 

 

Technical Details

Dimensions:

  • Height (base to center): 105mm / 4.1"
  • Center out to Cup: 102mm / 4"
  • Arm Length: 70mm / 2.8"
  • Weight: 111.8g

Wire Dimensions:

  • Wire Length: 99cm / 39"
  • Plug Length: 30mm / 1.2"
  • Diameter (thickness): 4.8mm / 0.2"

Specifications

  • Output: 0.4V to 2V
  • Testing Range: 0.5m/s to 50m/s
  • Start wind speed: 0.2 m/s
  • Resolution: 0.1m/s
  • Accuracy: Worst case 1 meter/s
  • Max Wind Speed: 70m/s
  • Connector details: Pin 1 - Power (brown wire), Pin 2 - Ground (black wire), Pin 3 - Signal (blue wire), Pin 4 not connected

 

Datasheet (In Chinese)

BE15000782

No customer reviews for the moment.

Add a review

Your email address will not be published.Required fields are marked*

Related Products