Shield EKG EMG - Electrocardiography Electromiography
  • Shield EKG EMG - Electrocardiography Electromiography

Shield EKG EMG - Electrocardiography Electromiography

0 Review
€31.86
Tax included
BE15000857

This is EKG/EMG shield which allow Arduino like boards to capture Electrocardiography Electromiography signals.

Quantity

  • Política de segurança Política de segurança
  • Política de entrega Política de entrega
  • Política de devolução Política de devolução

Shield EKG EMG - Electrocardiography Electromiography

This is EKG/EMG shield which allow Arduino like boards to capture Electrocardiography Electromiography signals. The shield opens new possibilities to experiment with bio feedback. You can monitor your heartbeat and log your pulse, recognize gestures by monitoring and analizyng the muscule activity as done in this project.

Features

  • stackable headers up to 6 channel may be stack and wired to A0-A6 analogue inputs
  • calibration signal generation by D4/D9 digital output
  • preciese Trimmer potentiometer for calibration (all boards are shipped completely assembled, tested and calibrated so you should not do this unless you wat to see how things works)
  • Input connector for normal or Active electrodes
  • works with both 3.3V and 5V Arduino boards

This is EKG/EMG shield which allow Arduino like boards to capture Electrocardiography Electromiography signals. The shield opens new possibilities to experiment with bio feedback. You can monitor your heartbeat and log your pulse, recognize gestures by monitoring and analizyng the muscule activity as done in this project.
FEATURESstackable headers up to 6 channel may be stack and wired to A0-A6 analogue inputscalibration signal generation by D4/D9 digital outputpreciese Trimmer potentiometer for calibration (all boards are shipped completely assembled, tested and calibrated so you should not do this unless you wat to see how things works)Input connector for normal or Active electrodesworks with both 3.3V and 5V Arduino boardsDOCUMENTSSHIELD-EKG-EMG user's manual revision EHARDWARESHIELD-EKG-EMG schematic in PDF format released under Creative Commons Attribution-Share Alike 3.0 United States LicenseSHIELD-EKG-EMG schematic and board in Eagle format released under Creative Commons Attribution-Share Alike 3.0 United States LicenseSOFTWAREElectric guru monitoring software, created by Rob SacksArduino example for EKG capture and interface to Electric Guru for OLIMEXINO-328/Arduino boardsMaple example for EKG capture and interface to Electric Guru for OLIMEXINO-STM32Pinguino example for EKG capture and interface to Electric Guru for PIC32-PINGUINO/OTG/MX220 (refer to the readme and the comments in the code for more info)

BE15000857

No customer reviews for the moment.

Add a review

Your email address will not be published.Required fields are marked*

Related Products