Acessórios

Produtos visualizados

Pololu Wheel for FEETECH FS90R Micro Servo, 60×8mm Pair - Black

BE15000594

Novo produto

These black plastic wheels are designed specifically for use with FEETECH FS90R micro continuous rotation servos. The wheels have silicone tires and measure 60 mm (2.36?) in diameter. Two additional mounting holes for 4-40 screws make it possible to use the wheel with several of our universal mounting hubs. The wheels are sold in pairs.

Mais detalhes

Aviso: Últimos itens disponíveis!

5,30 € com IVA

Adicionar à Lista de desejos

Mais informação

Overview

This pair of wheels is designed specifically for use with FS90R micro continuous rotation servos from FEETECH (formerly known as Fitec), and the combination can serve as a small, inexpensive, and easy-to-control drive system for a miniature robot. The wheel presses onto the servo spline just like a typical servo horn, and the small screw included with the FS90R accessory pack for mounting servo horns should be used to hold the wheel in place.

 

The wheels have silicone tires and measure 60 mm (2.36?) in diameter. Two additional mounting holes for 4-40 screws make it possible to use the wheel with our universal mounting hubs for 3mm shafts, 4mm shafts, and 5mm shafts. The slots in the five spokes fit #2 or M2 screws and allow additional accessories to be mounted to the wheel (e.g. decorations or parts of an encoder system).

 

Pololu Wheel for FEETECH FS90R Micro Servo, 60×8mm, with tire removed.
Pololu universal hub for 4mm shaft mounted to Pololu 60×8mm wheel.

 

Dimensions

Dimensions of Pololu Wheel for FEETECH FS90R Micro Servo, 60×8mm. Units are mm over [inches].

 

A more detailed dimension diagram is also available as a downloadable PDF (214k pdf).