Componentes Audio

Produtos visualizados

Electronic Brick - Buzzer

BE15000612

Novo produto

Electronic brick of buzzer can be connected to the digital I / O port, when the output is low, buzzer will give a long sound.

Mais detalhes

2,90 € com IVA

Adicionar à Lista de desejos

Mais informação

Overview

What is an electronic brick? An electronic brick is an electronic module which can be assembled like Lego bricks simply by plugging in and pulling out. Compared to traditional universal boards and circuit modules assembled with various electronic components, electronic brick has standardized interfaces, plug and play, simplifying construction of prototype circuit on one’s own. There are many types of electronic bricks, and we provide more than twenty types with different functions including buttons, sensors, Bluetooth modules, etc, whose functions cover from sensor to motor drive, from Ethernet to wireless communication via Bluetooth, and so on. We will continue to add more types to meet the various needs of different projects.

Electronic brick of buzzer can be connected to the digital I / O port, when the output is low, buzzer will give a long sound. If it is connected to an analog pulse width modulation (PWM) output , the buzzer can produce a variety of tones, which can be made into the speaker of electronic organ.

 

Documents

Please visit our wiki page for more info about this product. It will be appreciated if you can help us improve the documents by correcting the errors, adding more demo codes or tutorials.

 

Technical support

For technical support, please open a ticket on Itead Support System.

 

Additional Information

Link Wiki

N/A

Brick Interface

3PIN

Brick Power Supply

5V

Board Size

33 × 14 × 1.6mm

LED Color

No

Weight

15.0000

 

Code:

Connect S port of electronic brick of buzzer to D13 port of Arduino, and we will use the following program to make buzzer produce sounds at intervals of 1s.

 

 int buzzer = 13;
 void setup() {                
 // initialize the digital pin as an output.
 pinMode(buzzer, OUTPUT);     
 }

 void loop() {
 digitalWrite(buzzer, HIGH);   // turn the buzzer off (HIGH is the voltage level)
 delay(1000);               // wait for a second
 digitalWrite(buzzer, LOW);    // turn the buzzer off by making the voltage LOW
 delay(1000);               // wait for a second
 }

Acessórios

Clientes que compraram este produto também compraram: