Raspberry Pi

Produtos visualizados

Cirrus Logic Audio Card for Raspberry Pi A+ B+ and 2

BE15000491

Novo produto

Cirrus Logic Audio Card offers an unprecedented level of features and performance for avid audiophiles who want to use their Raspberry Pi A+ and B+ for audio applications.

Mais detalhes

54,49 € com IVA

Adicionar à Lista de desejos

Mais informação

Cirrus Logic Audio Card for Raspberry Pi A+ B+ and 2

 

Cirrus Logic Audio Card offers an unprecedented level of features and performance for avid audiophiles who want to use their Raspberry Pi A+ and B+ for audio applications. The Cirrus Logic Audio Card features high definition, high performance audio playback and audio input using either line level analogue/Stereo digital (SPDIF) or the onboard digital microphones.

Raspberry Pi models A+ and B+ have a limited number of audio features, as there is no audio input function at present. The Cirrus Logic Audio Card offers Raspberry Pi A+ and B+ users the ability to input and output High Definition audio from their Raspberry Pi!

The Cirrus Logic Audio Card brings all the features found on the previous version of this card from Wolfson Microelectronics to the Raspberry Pi A plus and B plus model. It offers a similar flexibility to a PC soundcard to capture audio alongside their camera, and experiment with stereo digital capture and playback.

This Audio Card requires a patch set to be downloaded to the standard Raspian Raspberry Pi Operating System.

Important Note: Please be aware that the Cirrus Logic Audio Card is only compatible with Raspberry Pi A+ and B+. It cannot be used on Raspberry Pi Models A or B.

 

Features

  • For use with Raspberry Pi A plus and B plus (40-pin extended GPIO models)
  • Capable of rendering HD Audio, at 24-bit, 192kHz
  • 3.5mm 4-pole jack for a headset/boom mic combination for gaming or VoIP applications
  • Two DMIC microphones onboard for stereo recording
  • 3.5 mm jack for Stereo Line Input for high quality audio recording or capture
  • 3.5 mm jack Stereo Line Output for connection to devices such as external stereo amplifiers or powered speakers
  • Stereo Digital input and output (SPDIF)
  • On-board class D power amplifier for external speakers. An auxiliary power input is provided for this function.
  • High SNR (Signal to Noise Ratio) for high quality playback and record

 

Download

Software Download

Acessórios