Sensores Térmicos & Humidade

Produtos visualizados

DS18B20 Digital Temperature Ver maior

DS18B20 Sensor Temperatura Digital

BE15000024

Novo produto

6,64 € com IVA

Adicionar à Lista de desejos

Mais informação

This is DS18B20 digital temperature sensor module for Arduino -55°C~125°C
Digital signal output
Detect ambient air temperature
Compatible with Arduino DIY project
Main chip: 18B20 temperature sensor
Material: PCB

Specification:

Resolution adjustment range :9-12
With mounting holes for easy installation, Aperture: 2.5
Temperature measuring range: -55 ~ +125 ?
Temperature measurement accuracy: 0.5 ?
Working voltage: DC 5V
Size: 28mm x 12mm x 10mm

Code:

#include <OneWire.h>
#include <DallasTemperature.h>
 
// Data wire is plugged into pin 2 on the Arduino
#define ONE_WIRE_BUS 2
 
// Setup a oneWire instance to communicate with any OneWire devices 
// (not just Maxim/Dallas temperature ICs)
OneWire oneWire(ONE_WIRE_BUS);
 
// Pass our oneWire reference to Dallas Temperature.
DallasTemperature sensors(&oneWire);
 
void setup(void)
{
  // start serial port
  Serial.begin(9600);
  Serial.println("Dallas Temperature IC Control Library Demo");

  // Start up the library
  sensors.begin();
}
 
 
void loop(void)
{
  // call sensors.requestTemperatures() to issue a global temperature
  // request to all devices on the bus
  Serial.print(" Requesting temperatures...");
  sensors.requestTemperatures(); // Send the command to get temperatures
  Serial.println("DONE");

  Serial.print("Temperature for Device 1 is: ");
  Serial.print(sensors.getTempCByIndex(0)); // Why "byIndex"? 
    // You can have more than one IC on the same bus. 
    // 0 refers to the first IC on the wire
 
}


The most recent version of this library can be found at 
http://www.milesburton.com/?title=Dallas_Temperature_Control_Library

Acessórios

Clientes que compraram este produto também compraram: