Vários Cabos

Promoções

Produtos visualizados

3-Pin Female JST PH-Style Cable (30cm) for Sharp Distance Sensors

BE15000568

Novo produto

This 12-inch (30-cm) cable has 26 AWG wires and a 3-pin female JST PH-style connector that works with Sharp analog distance sensors that have mating PH connectors. The other ends of the wires are unterminated; they can be cut to length to match your application. The wire color scheme matches the Sharp distance sensor pinout: red for power, black for ground, and white for signal.

Mais detalhes

Esse produto já não se encontra disponível

0,96 € com IVA

Adicionar à Lista de desejos

Mais informação

This 12-inch (30-cm) cable has 26 AWG wires and a 3-pin female JST PH-style connector that works with Sharp analog distance sensors that have mating PH connectors, such as the 4-30 cm GP2Y0A41, the 10-80 cm GP2Y0A21, and the 20-150 cm GP2Y0A02.

Note: This cable is not compatible with the 2-15 cm Sharp GP2Y0A51, which has a JST ZH connector. For a cable that works with that sensor, consider the 3-Pin Female JST ZH-Style Cable.

The other ends of the wires are unterminated; they can be cut to length to match your application. The wire color scheme matches the Sharp distance sensor pinout: red for power, black for ground, and white for signal. The connector pins have a 2 mm pitch.

You can use our male or female crimp pins and a 0.1" 3×1 crimp connector housing to make a connector for the unterminated end of the cable that is compatible with standard solderless breadboards, perfboards, and the 0.1" male and female headers commonly found on microcontroller boards like Arduinos and Orangutan robot controllers.

Clientes que compraram este produto também compraram: